Fiber Blowing M/C LB-601
Introduction
- Used for recycling comber waste, cutter waste, and other cotton scraps
- Equipped with a spiral beater; the screw shaft separates waste materials, specially designed for recycling raw materials used in O.E. (open-end) rotor spinning
The Long Bliss LB-601 Fiber Blowing Machine is a cotton cleaner machine designed to recycle comber waste, cutter waste, and other cotton scraps into reusable fiber for open-end (O.E.) rotor spinning. As a cotton cleaning machine, it uses a spiral beater and screw shaft to separate waste material for gentle, thorough fiber opening. A frequency inverter allows adjustable operating speed, a screen mesh filters cotton husk dust, and suction air inlets on both sides collect dust for a cleaner working environment.
- Equipped with a frequency inverter for adjustable operating speed
- Filters cotton husk dust through a screen mesh
- Suction air inlets on both sides collect dust in a centralized manner
LB-601
| capacity | 400~800kg/hr |
| motor horsepower | 11.95kw |
| machine type | 7-section configuration |
| machine dimensions | 6200x4800x4200mm |
| running speed | 300~600 r.p.m. |
Long Bliss offers three configurations in this series to match different production capacities and floor space: the 7-section LB-601, the 5-section LB-602 Five-Section Blowroom Opener, and the 3-section LB-603 Three-Section Blowroom Opener. The right configuration depends on target output volume and available floor space.
LB-602 Five-Section Blowroom Opener
| capacity | 400~600kg/hr |
| motor horsepower | 8.25kw |
| machine type | 5-section configuration |
| machine dimensions | 4800x4800x4200mm |
| running speed | 300~600 r.p.m. |
LB-603 Three-Section Blowroom Opener
| capacity | 300~500kg/hr |
| motor horsepower | 6.25kw |
| machine type | 3-section configuration |
| machine dimensions | 3300x4800x4200mm |
| running speed | 300~600 r.p.m. |
How does the LB-601 handle dust and impurities during cotton cleaning?
The LB-601 filters cotton husk dust through a screen mesh, and suction air inlets on both sides collect dust in a centralized manner. This keeps reclaimed fibers clean before downstream processing.
Can the LB-601's operating speed be adjusted for different types of cotton waste?
Yes. The LB-601 is equipped with a frequency inverter that allows the running speed to be adjusted between 300 and 600 r.p.m., so operators can tune the machine to the comber waste, cutter waste, or cotton scraps being processed.